You might not have 9 or 10 acres of land to mess around with, but that does not mean you can’t make a good track. You can still make a useful dirt bike track as long as you follow some important rules. As long as you have a bit of land and a tractor you can make a track that will give you many years of fun riding your dirt bike motorcycles. Of course, you may perhaps find that making dirt bike tracks is more thrilling than actually riding.
Step 1 – Getting Authorization is Job Number One
There’s no use to take it any further till you get some required permissions. Obviously, asking your folks for permission is step number one, but there are more individuals that must give their approval too. You must be sure you obtain whatever permits are needed that will enable you to lawfully make and use your track.
Additionally, you want to ask your neighbors for the go-ahead. I know it’s tough to imagine, but some individuals don’t like noisy dirt bikes drowning out the sound of their television or additional dust settling on their outside furniture. Save yourself a heap of hassles by making sure you get approval from your neighbors, otherwise you run the risk of creating a dirt bike track that you can’t ride on. Spending cash and time making a wonderful track, only to have the local authorities close you down, will not improve relations with your neighbors.
Step 2 – Choose the Top Location
Clay is the most effective kind of soil for a track and will throw up less dust and dirt than other kinds of dirt, but the clouds of dust can still be bothersome to neighbors. If all of them possess dirt bike motorcycles you almost certainly won’t have too much of a problem, however the possibilities of that are extraordinarily slim. If they seem a bit tense about having a track in their backyard maybe you can agree to use it on specific days of the week.
You want to create it in an area where the terrain will require less work to whip into shape. For instance, if you are able to find a site where the natural landscape already has small hills you won’t have to spend as much time with the Bobcat building your own personal jumps from scratch.
If you have the option of selecting a location with dry dusty dirt or good clay soil, do not opt for a future dust bowl. In addition to loud engines, dust and dirt can be a big issue in your neighbor’s eyes. If at all possible, try to choose a site where an excessive quantity of dirt and dust will not end up in your neighbor’s backyard.
Also, be aware that low lying sections of track can become small lakes during wet weather, therefore it’s to your best interest to plan your design correctly. It will also help if you create the paths at an angle, permitting water to run off rather than puddle. With correct planning you can eliminate a ton of future maintenance.
Step 3 – Design Your Course prior to Getting into the Bobcat
Ride your bike through the future track prior to selecting the route that your track will take. This will give you a good idea on the natural flow of the land and allow you to style a suitable track layout. Dirt bike tracks should be designed to take advantage of the unique terrain that already exists. The track must also be based on your talent level. For instance, if you are a newbie it probably is not wise to build jumps that you can’t deal with safely.
Above all else, dirt bike tracks need to be built to be as safe as possible. Don’t make jumps where big rocks and trees will make riding hazardous. If you can’t get away from the trees and rocks at least place some padded protection such as hay bales or old mattresses in front of potentially damaging items. If you’re going to have an accident you would like to be able to get up and ride again. Hospital trips are not as fun as they’re cracked up to be.
Step 4 – Rev up that Bobcat and Start Moving that Dirt
If you do not have a powerful tractor in your garage a Bobcat will be your next option. It is possible to rent one, with or without an operator, at very cheap prices. You’ll be shocked at how fast your track will take form when you begin pushing that dirt around.
Mold some hills into jumps that fit your talent level and put berms at the base of other hills. It is a sensible idea to form as many turns and corners as you can so that you won’t be able to develop too much speed going into the jumps.
Sticking with these four steps can help you create a dirt bike track that you can be proud of and that will be safe for many years to come. Do yourself a favor and spend as much time as necessary coming up with the design of the track. A well-designed plan will be safer, more fun, and require less work and maintenance.