Skip to content

Furniture - 4. page

How To Clean Chrome Barstools

Chrome barstools are very beautiful and sleek. Chrome is used to create a retro appearance but equally it is at home in compare of the cutting edge contemporary design styles, which we can present here for your consideration. Chrome barstools can offer a traditional static set and can also swivel. Chrome has stood the test of time by keeping its good looks and also by not corroding as it is a hard wearing and durable material. This is the reason why auto fenders are made from chrome. It is the retro 1950’s style statement both on the classic cars of the period and in the interiors.

Chrome is known to be tough, extra strong and is also built to last. Black Chromium is used to give dark coloring to chrome plating. On the other hand, hard chrome is used to restore parts of industrial equipment that have worn down, and to lower the amount of wear and friction on the equipment. The chrome, which consists of bright colors, creates a very shiny finish product whereas black chrome is used to give dark coloring to chrome plating. Chrome maintains a bright finish and also resists wear and is harder than the other metals. It also provides excellent protection. This is the reason why chrome barstools are stronger than the wooden bar stools.

Ideally chrome is best metal, which can be used to make barstools but it is also very important to maintain it. It is very important to constantly maintain the chrome barstools by wiping it quickly when there is a spill. To clean the chrome barstools water and mild soap are very useful. After the cleaning of this chrome barstool is done it should be completely dried. Some of this chrome when used in metal furniture can be just dusted, cleaned and polished with one action. You can even use a multi-surface polish, which will help you long way. Some of the barstools also consist of padding on the seats, as well as armrests. Majority of the barstools have no back, whereas some other models do. These chrome barstools will last the most and should be really taken care off by cleaning it regularly and care can even increase the life of these barstools.

There are four ways, which can be used for cleaning the chrome barstools such as:

* Vinegar: To clean chrome, wipe with a soft cloth dipped in undiluted white or cider vinegar.

* Baby Oil: Apply baby oil with a soft cloth and polish to remove stains from chrome trim on faucets, kitchen appliances, vehicles, etc.

* Aluminum Foil: Briskly scrub rust spots on car bumpers with a piece of crumpled aluminum foil, shiny side up. Also works well on the chrome shafts of golf clubs.

* Chrome faucets: are easily cleaned with soapy water. Rinse and wipe dry with a paper towel to restore luster. An old toothbrush helps get deposits of dirt out from under edges of faucet. For hard-to-remove spots, use silver polish, rinse, and wipe dry.

Make Your Own Black Walnut Stain

If you have quite a few black walnut trees on your property, or have access to them, you can easily make a homemade walnut stain that will cost absolutely nothing. I wouldn’t recommend using the stain on fine furniture, but if you are staining homemade wooden toys, small woodworking projects, or just touching up a bit of walnut furniture, it works great.

I used to make wooden rifles that shot rubber bands for my son and his friends. I stained all of the rifles with my homemade walnut stain. I didn’t even bother to varnish over the stain finish and they still stood up to the test of time.

To make the stain, gather a good supply of black walnuts. A plastic 5 gallon bucket is a good choice for putting them in. When picking up black walnuts, it’s best to wear gloves. They are almost guaranteed to leave dark stains on your hands. You will need to choose black walnuts that have the outer husks turned from green to brown or black. Don’t remove the husks, as they help in making the stain. Fill the bucket about half full of walnuts and husks.

Boil a large pot of water. Pour the boiling water into the plastic bucket. Continue to fill the bucket with boiling water until the tops of the walnuts are completely covered.

Now you need to let the walnuts steep in the water for at least a week. The longer they steep in the water, the darker the stain will become. You may want to put a lid on the bucket to keep children or animals from getting into it.

After a week or two, drain the liquid through a metal colander or wire screen. You may have to do this more than once to get the smaller particles of debris out of the liquid. Once the dark liquid has been well strained, it’s ready to use.

Just apply it with a brush or wipe it on with a cloth, just as you would stain bought from a store. If the wood will be exposed to moisture, it’s best to cover the stain with a protective layer of varnish or polyurethane. The stain is water soluble, so if it gets wet, it may come off and stain items that come into contact with it.

If you don’t need to use a protective coating, you can easily reapply another coat of stain in the future. The stain on the wood may start to lose its darkness over time. For future use, you can easily store any leftover stain in plastic or glass jars with lids. Don’t let them freeze or the jars may break.

Attract More People With Nightclub Led Lighting

When it comes to partying, quite a few folks prefer to attend to bars, nightclubs, pubs, discos etc. It is due to the exciting environment made in these places. Having said that, among the many thousands of nightclubs out there, only some of them would be popular. This is definitely due to the enthralling and vibrating environment existing in these places. Every individual responds to the outside stimuli obtained by the five senses. Of all senses, the eyes are the most important and while thinking of a nightclub for partying the lighting in it would matter a lot. The present day nightclub LED lighting is quite impressive and advanced.
Nightclub LED lighting once coupled with the sound system generates an enthralling environment in the nightclub. As LED lights consume comparatively less power, they are the most preferable kinds to be utilized to illuminate the interiors of night clubs. Nightclub LED lighting today is available for the walls, ceiling and also the dance floor. Contrary to regular lighting, the nightclub LED lighting consists of lights of different colours making the interior environment colorful. The blinking of nightclub LED lighting once connected to the sound system helps make the patrons on the dance floor experience a completely different world.
A nightclub LED lighting system can get even more enticing and vibrant once connected with the sound system. As the LED panels go on and off along with the music, the excitement of the visitors increases. This is truly the secret behind the triumph of quite a few nightclubs and discos today. Having said that, while setting up the nightclub LED lighting, a professional has to be employed. As it is a once for all activity, a professional and skilled nightclub LED lighting specialist has to be entrusted with the job. An expert firm in the field of nightclub LED lighting which has a strong DJ base may be preferred.
If one is questioning where to discover such professional, skilled and skilled people to install nightclub LED lighting, then the world-wide-web is the very best place. There exist various companies which offer LED lighting installation services. Having said that, it is always advisable to opt for one who has skills in implementation of LED lighting and sound systems, furniture and various aspects. As all of these would be required for a nightclub, an expert in fitting all of these may be the appropriate one to install the finest nightclub LED lighting. Check out more details on the world-wide-web.

How To Maintain A Leather Sofa

In the past few years or so the leather sofa has become the must have owner for any young and trendy home owner and is often one of the biggest investments people will make in home furniture. The market is currently a wash with leather sofas and people can chose from a range of different sizes, leather types and style. Once a consumer has made the all important choice they take it home and start making use of it. After a while signs of fatigue start to show and so what can be done to maintain the quality of your leather sofa?

Cleaning

To help maintain the appearance of your sofa it will require regular cleaning. Simply brushing dust and crumbs off wont help maintain the quality and appearance of the leather. Leather is particularly prone to ageing and if untreated for long periods can discolour. This is why using leather cleaning products is so important.

Before you can clean your sofa you should identify the type of leather your sofa is made from. Typically leather sofas are made using corrected grain, semi-aniline, double thickness, natural waxed hide or full aniline leather. Each different type works in a different way. Once you know what type of leather you have you will be able to apply a leather cleaning product.

When applying leather cleaner to your sofa you should follow the same principals you would use to wax a car. Although leather cleaner will restore the appearance it cannot be used to repair scratches or scuffs.

Leather Repair

Over time leather sofas become vulnerable to scuffs and and scratches and repairs are often required. Repairing the damage is usually a much more economical option than replacing the sofa altogether. The repair process is often complex and requires special machinery. With this in mind it is usually best to let a professional repair your sofa.

As with any item of furniture or even a car the key is to make repairs and carry out cleaning regularly. This will help increase the shelf life of your sofa and keep it looking pristine.

Nightclub Interior Design Tips

There are a lot of points which do be considered once you consider the nightclub interior design. These points include the concept, lighting, dance floor, and much more. These points are really crucial to make the finest impact with your prospects.
The nightclub interior design is really crucial if you need to be successful. It is typical once you make an impact with the interior they will put you on their number to arrive back for a long term visit. You need to make a statement and make the night time unforgettable for everyone.
The concept is really crucial once you are working on the nightclub interior design. You need to be able to conjure up a concept. Your nightclub may be a retro club and you play songs from the past. You may possibly want to have a psychedelic glance with lasers and points shooting around the room. Once you have a good idea of the concept you areengaged in afterwards you will perceive that furniture finest matches the concept you are making an attempt to target.
Lighting is one of the most crucial points once you consider nightclub interior. There arent any clubs which lookthe same once the head lights are on. You need to consider what the interior of the club is heading to glance prefer once the lights are out and the dance lights and the club lights are on. The dance and club lighting can make the stick looksolely different.
One more consideration with interior design for a nightclub is the dance floor. There are several points which you can do with a dance floor today. Quite a few dance floors light up with LED lighting. It is possible to choose really state of the art dance floors to decorate the club. Your dance floor may be your signature piece with a big disco ball hanging center from the ceiling.
Once you are thinking concerning nightclub interior design you need to consider the dance floor because it may be the signature of your bar. The furniture should highlight the concept and supply quite a few of comfort. The lighting will entirely alter the way the club looks once the most important lights are out and do so much more. The nightclub interior design may be the reason which your consumers proceed to arrive back for more. A bad design maydrivecustomers away and have no desire to everarrive back.

Sealing Your Patio Pavers – 11 Keys To Successfully Sealing Your Patio

When my neighbor first decided to install a paver-block patio, he chose paver stones for several reasons. He thought they would last longer than other materials like wood, or poured concrete, and that they would be maintenance free. While they do look great and they’re incredibly durable, it wasn’t long before he learned that they aren’t completely maintenance free.

After several seasons of rain, snow and sun, the patio didn’t look as good as when he had it installed. The sun was beginning to fade the color in some areas, the sand between the stones had been washed away, and weeds had started growing in the gaps between the pavers. He even began to see ant colonies forming using his precious paver sand as their new home.

The solution to his problem was fairly simple. It was time to clean the patio up and seal it for protection. “Just observe these simple 11 keys”, I told him, “and when you’re done your patio will look like it was done by the Pros!”

1. Take your time. With every project that I undertake, I can’t stress this point enough. When you rush a project through you make mistakes, and mistakes are what the pros are able to avoid. Sometimes it’s just a matter of cleaning the surface a little better, or rinsing things off a little more. Maybe it’s allowing a little more time between coats for your sealer to dry or waiting a few more hours before re-installing your patio furniture. The chances are much better that when the work is all done, you’ll look at the finished result and be satisfied that it turned out just as you had hoped it would.

2. Often times when you inspect the patio, prior to washing you’ll notice stains. Leaves that have remained on the patio can leave tannin stains. Iron furniture that sits on the patio can leave rust stains. Whatever stains you find need to be removed prior to sealing or they will become permanent, so now is the time to work on them. The simplest way to get the stains out is by using an acid cleaner. Conventional muriatic acid works well and it’s cheap, but I hate it. If you get it on your skin it burns and the vapors from it are just terrible. Instead, I use a “safer” cleaner, such as Defy Safer Masonry Cleaner. For severe stains, I simply pour a little cleaner at full strength on the stain and give it a few minutes to work before rinsing. If the whole patio is fairly dirty, dilute the cleaner 4:1 (four parts water to one part cleaner) and using a garden-type pump up sprayer, spray the entire surface with cleaner. Allow the cleaner to remain wet on the surface for 5 minutes or so, and then rinse using a power washer.

3. In regard to the prep work, sealing you patio isn’t much different than staining your deck or painting your house. Much of the quality of the job comes down to how well you prepare the surface.

Patios that have weathered will often times have mildew, moss and algae growing on the stones and in the sand between the joints. Weeds that have begun to grow as well as any other foreign debris need to be removed, and for a patio that means a good cleaning. The easiest way to clean things off is with a power washer.

Make certain that you select a washer with enough power to do the job. I try to never use anything rated less than 2400 p.s.i. Select a tip that will fan the water out slightly, 15 or so. Also, always work in sections.

Patios should be constructed so that water runs away from the home. So begin working near the house or the high side of the slope of the patio. Rinse debris down the patio’s natural flow, away from the house. You’ll loose some of the sand between the joints during the cleaning process and that’s ok. We’ll replace the sand once the patio is cleaned up. Just be careful not to blow out more sand than is necessary while doing your cleaning.

4. With the patio now cleaned, look around and inspect the condition of the pavers. Over time, paver stones can settle or shift, making them unlevel. If you have some bricks that are out of place, using a screwdriver and a stiff putty knife, pry the uneven stones out. Once removed, you can add a little sand, smooth it out with the blade of your putty knife, and re-install the bricks.

5. The last remaining step in getting the patio ready to seal is to re-grout the joints between the stones with fresh sand. This step isn’t hard, but it does take a little time so be patient. To do this, I use a fine grade of play box sand. Pour a small amount on the patio and begin sweeping it into the joints using a push-broom. Sweep in both directions; back-to-front and left-to-right to insure the joints get completely filled. As the sand gets used up by filling the joints pour a little more onto the patio and keep sweeping.

6. This is the part you’re going to love. Go take a break! Remember when we started I said to take your time? After all of the cleaning that we did, the ground under those pavers is soaking wet and needs to dry out. Give the patio a couple of good, hot sunny days to dry out before applying any sealer. If you don’t, you could end up trapping moisture under the sealer and the whole project will turn a milky white color…yuck!

7. It’s time to pick out your sealer now and the choices are solvent-based products or water-based products. I hate solvents! “Why?” you ask. Here’s why:

1. They’re bad for our environment.
2. They kill grass and flowers.
3. They smell terrible.
4. Everything has to be cleaned up with messy solvents.

Water-base sealers are a much better choice. Besides being both easy to use and easy on the environment, they offer another amazing advantage. They “stabilize” the sand. When cured, water-based sealers such as DEFY Paver Sealer will harden the joint sand and lock it into place. This prevents it from washing out during future rains.

8. Every manufacturer’s product can be a little different so always read the directions. It only takes a few minutes but it will ensure that you have all the right information before you get started. Pay attention to details such as how many coats of sealer to apply, how long to wait between coats, how to properly apply the product and how to clean it up. There are any number of variations to these questions and more. Read the label first and you’ll be likely to get it right the first time.

9. Now the fun begins…applying the sealer. To do this, I love to use a garden-type pump up sprayer but I’ll warn you in advance, don’t buy a cheap one! The better sprayers (they usually cost over $50) have a metal fan-style spray tip and do a much better job than the inexpensive weed sprayers. When you’re looking for a sprayer, the key here is to look for a “fan-style tip”.

The patio edges can be cut-in using a 4″ nylon brush and then you’re ready to start spraying. Water-based sealers normally require two coats to be applied. Once you’ve cut-in the edges, spray the entire patio with the first coat. Then wait for the sealer to dry enough that it can walked on, and do the same thing all over again. If you get it too heavy and the sealer starts to puddle, use the brush to get rid of the puddling by brushing it out.

10. Ok, if a little is good then a lot must be better, right? No! Remember, we’re sealing concrete paver stones and these stones are sitting on a bed of sand. When the sand gets wet and then the sun comes out, these pavers need to breathe, meaning they need to let any water vapors pass through them. When too much sealer is applied, the water vapor can no longer pass through, which results in a white “blushing” effect or even potentially peeling. Limit your application to two coats and you won’t have a problem.

11. Ok, great job. Now for some maintenance. Blow the leaves off when they fall to keep them from staining. Rinse the dirt and debris that shows up over time. And as the weather begins to dull down the finish and the patio loses its luster, simply rinse it off and apply a light maintenance coat. Catch it before the patio gets too weathered and it’s really that simply.

So that’s it. That’s everything. Eleven keys to sealing your patio. Go ahead and try these eleven keys for yourself. See what the results are when you set out on your next project to do it like a pro. You might just surprise yourself!

Copyright (c) 2009 SaverSystems

The Rising Fame Of Retro Modern Design

Retro modern design is coming back with a vengeance. Just as the title implies, it brings together, the excellent, funky fashion of retro design and the smooth sophistication of modern design. The result is totally innovative and unquestionably breathtaking. In spite of the simple fact that each the retro design and the modern design have been around for a lengthy time, the retro modern design aesthetics is a totally new development. A lot of people are using it to show their own personal styles when it comes to clothing. More than anything, however, it is the newest trend in interior design.
Every single style of design is continuously evolving. Some day, for instance, when people talk about retro designs, they may truly be referring to the designs that are typical right now. Modern design has developed over time also in order to stay up to date, it has to, after all. Modern is only modern during the time it is conceived. Whatever was modern in the sixties and 70s is now thought of retro. When you consider it that way, it is easy to see that it is rather secure to assume that the retro modern design fashion should always be new and innovative; it should be continuously changing.
Thus, we are now seeing more and more people adopting the retro modern design aesthetics. They are decorating their houses that way. A lot more to the point, it is the perfect design fashion for restaurants, pubs, and of course, for clubs. Being able to combine the fun, brightly coloured, wildly patterned aesthetics of the retro design we all know and really like with the smooth, sharp, and sophisticated aspects of the excellent, clean modern aesthetics can make for a very sharp result.
The retro modern design almost cannot be defined, because there are so many combinations possible. It could refer to a retro styled bar stool rendered in the smooth, monochromatic colours black, white, chrome, metallic, gray related to the majority of modern pieces. By the same token, you could be referring to a vibrantly coloured, brightly painted table with a some lacquer to make it shine, but using a sharp, keenly angled silhouette of the kind frequently seen in modern furniture.
When you wish to decorate in the retro modern design fashion, you have practically countless possibilities. There exist many details at your disposal that you may not expect to fall into this design category. No matter what, however, you are sure to attract the interest of your potential customers and make them comment on your design aesthetics.

What To Expect At J.c. Penny Retail Stores And Their Latest Offers

Many people come to Penneys to enjoy the thrill of its coupons and its cutting edge brands only come secondary in this shop. Its merchandise is very much serviceable and the store performs online pretty fine and equally good as its retail chain of stores. The company also knows its customers well and embraces them with periodic offers and discounts every now and then. Its customers count on the store for its value and excellent service. Let us discuss some of the hot deals from the retailer in this article.

Most people would think of Penneys when they wish to remodel their entire room or house for it stocks all latest stocks at the most recent cost. Most of the stocks found online would amaze their customers and are shipped within a weeks time at the latest. Its decorative items would offer the feeling of entering a supermarket for a grand eve; as expressed by some of the most loyal and dedicated customers of J.C. Penny.

J.C.Penny offers $10 off for every $50 spent and its corresponding denominations that go as high as $200. These discounts are available on a variety of products from the retailer such as accessories, home decor, apparels and shoes. It does offer $15 off for every $75 spent and $20 off on $500 spent etc with the help of easily accessible coupon codes. It is also possible for customers to avail a flat 10% discount on its custom blinds, mattresses, fine jewellery, watches and other home decor essentials. These coupons are extended to be used on on-going sales and offer more than 40% off on selected furniture. This is by far the best offer any retail giant could offer and it also stocks other major goods at the most comfortable price. It is the responsibility of the customer to look for the best price and appropriate coupon to save big on the bills.

Yet another attractive offer from the retailer is its 30% to 70% discount on clearance stocks. Along with this it yields an additional 10% off on these items when someone uses the coupon code. This is the best clearance sale that would ever be possible with any retailer in the United States. Customers also could entitle themselves for free shipping when they shop for goods over $99. You dont have to think twice on the items sold by the retailer as they entitle these products with loads of discounts, they sell quality products for the best benefit of their customers.

JCPenney coupons include those that yield up to 50% off on apparels, up to $50 off on furniture and other selected home decor essentials. Baby apparels and accessories are no exception and secure deals are offered for these items as well as the retailer has understood the need and necessity of baby care essentials for new parents. These include furniture and bedding’s for babies and there are private JCPenney coupon codes 40% off codes available as well to claim these discounts for almost everything you would wish to shop for your home.

The Pros And Cons Of A Sleeper Sofa

A sleeper sofa is a pretty cool piece of furniture because of the way it can be used both as a couch and as a bed. Ive owned a few of these through the years and have discovered both some pros and some cons that I will share with you in this article. Of course, everyone is going to have a different opinion about these, but I think most will agree that a hide-a-bed sleeper sofa can, on the whole, be a pretty useful addition to your apartment or home.

The first thing youll notice when you go to move or life a sleeper sofa is the weight. Some of these things feel like they are nailed down to the floor. Heavy doesnt even begin to describe some of them. Since they have a rather elaborate metal framework to facilitate the fold out mechanism for the mattress, they tend to be pretty stout. This weight, on top of the wooden framework of the sofa can put these types of couches in the hundreds of pounds. Obviously, some arent quite as heavy as others, but most are heavy enough that you should pay to have it delivered, or at least have someone that can come and help you move it, it just isnt practical for one person. This weight factor is the main thing on the con side of things.

A secondary con I wanted to briefly mention is that sometimes the comfort of the sleeper sofa isnt so great. If you a get relatively inexpensive or cheap one, it will probably have a mattress that matches. Weve all had the miserable experience of trying to sleep on one of these with that bar in the middle of our back. Pretty uncomfortable. Like most things, you get what you pay for, and a sleeper sofa is no exception. If you plan on using your hide-a-bed a lot for sleeping, make sure it has a good mattress.

With those two cons out of the way, we can now consider the up side to owning a sleeper sofa. The main thing that I like about them is the way they can be kept in the main living area and be used as a normal couch, while at the same time it can be called upon to do double duty as a bed when you have guests over. When I was a kid I remember thinking how cool it was to sleep on my grandmas hide-a-bed. I think I was just fascinated with the way the mattress magically emerged from the couch. When I got a bit older I stayed at my aunts apartment and used her sleeper sofa. It was a really good one and I slept really soundly, no bar in the middle of my back keeping me up throughout the night.

Another thing you may not have thought of that is definitely on the pro side is the different configurations that manufacturers make these things in now. You can purchase a traditional sleeper sofa that looks like a normal couch, but you can also find them built in to part of a large sectional. They come in twin, double, queen, and even king sizes, though these are a lot harder to find.

If you want to save space, have a nice piece of furniture that can serve a dual function, and have a helper or two to move it around when needed, then a sleeper sofa may be just the thing for you.

Different Types Of Footstools

Footstools have been used for centuries all over the world. They are commonly used for comfort to support one’s feet while they sit but also as functional tools, and can be split into these two separate categories to describe the different types of footstools. Throughout the ages, they have evolved in and out of many different styles, ranging from simple wooden Spartan stools to elaborate and decorative Ottoman creations.

Footstools For Comfort

These are short and wide four legged stools which are used to support a persons feet as they sit. They are often upholstered in a fabric or hide for added comfort and this can be anything ranging from cushion to leather. They support a persons feet at near horizontal level as they sit, allowing the person to lie right back. They are also commonly called ‘footrests’. While their main purpose is just to make sitting more comfortable, they also increase the blood circulation in the legs more than sitting would, making them ideal for those who have trouble with blood clots or the elderly.

Footstools For Function

These are more simple and less decorative footstools, which act more as a small stepladder, allowing people to reach things just out of arms length or to get into doors that are raised high off the ground. These are especially useful if there are small children and can reduce the risk of accidents and injury by making it easier to get to those higher places. These footstools are ideal for the kitchen or garage, allowing storage in higher shelves. They also reduce the risk of injury in getting heavy objects down from hard to reach places. Indeed, they can also be used as a mini staircase such as on a caravan, allowing the residents to get inside more easily.

Both of these different types of footstools are extremely common and it’s easy to find the one you are looking for. You can also get footstools custom made to match the other furniture in your room. For this, and the health benefits they can bring, they also make great gifts.