Skip to content

Monthly Archives: November 2015

How To Determine Solar Panel Price

On turning the pages of history of mankind through ages, there is no dearth of instances wherein man has tried his ingenuity to harness the ever present solar energy to his advantage. While most of the experiments ended with a magnifying glass being used to light torches, the first device which successfully concentrated the suns rays was a solar energy cooker designed for an African safari. The credit of this invention was bestowed on a Swiss scientist, Horace de Saussure, and it was this discovery which laid the basis for the creation of the first modern solar panel in 1954. Being a novelty in that era, this device was exorbitantly priced but dedicated research through the years has resulted in the solar panel price in India to spiral downwards with the intention of making it affordable by all and sundry.

One of the main determinants of solar panel price in India as well as the world over is the type of panel which is chosen by the user after having gauged his requirements. In spite of the availability of myriad options, solar panels exist in two avatars namely flat plate collectors and evacuated heat tubes. While a normal flat plate collector is economically priced, when it is fortified with evacuated pipes, its price simply shoots through the roof. This is owing to the fact that these pipes are highly priced and on being installed greatly enhance the efficiency of the panel as well.

Yet another factor which makes a difference in the solar panel price is the size of the panel as also the scope of its usage. If the solar power requirement is limited to a single room with a window, a panel worth a few hundred dollars would suffice but on the other hand if the entire house depends on solar energy for its requirements then the cost is likely to run into thousands of dollars. An important recommendation in this regard is that any household should not depend solely on solar power and must have a back-up system to account for cloudy days and extra requirements.

Having decided to invest in a solar panel system, the next course of action entails conducting a thorough research on each of the options and then conducting a comparison of the solar panel price. The cost is assessed on dollar/watt ratio and an efficient panel is identified accordingly but adjudging if its ratio is close to the average estimated costing. Normally the trend which has been observed in this regard has been that brand new panels boast of a higher ratio and hence cost a fortune while those equipped with primitive technology provide the user with a lower ratio and thus are affordably priced.

At the lowest rung of the list of solar panel price in India is the option of scrap solar cells. During the manufacturing process some solar cells are broken down and are sold by manufacturers as individual units for a very low price. Scrap solar cells can also be purchased online through a reliable retailers website and then these need to be soldered together to form a single big unit. In this way the user can save considerably on the cost aspect provided he is an expert at soldering and has enough space to accommodate a large panel of many scrap solar cells welded together.

Why Invest In Real Estate In Hyderabad

Nowadays investing in real estate has become a popular trend, people see a big future in the real estate. Real estate dealing has also become a major source of much money for many people. All you have to do is find the right kind of property and invest in it and after a few years see the growth in investment.

Investing in real estate of Hyderabad:

Many people still have doubts about investing in real estate in Hyderabad, and the time is just right to invest in real estate. Hyderabad has gained a reputation for itself in the global market, and the city grows at a steady rate. Now is the right time to invest in property in Hyderabad, the growth in IT sector and business have prompted many people to move to Hyderabad. And the location and the beauty of the city have also influenced a lot of people to invest in property in Hyderabad. Here are some of the reasons as to why you should invest for property in Hyderabad.

Development in IT industry, international airports, and new projects like IT parks; hardware parks, star hotels etc have influenced the life of Hyderabad. All these projects make Hyderabad the most happening place to invest in property.

Many MNC have setup their Indian offices in Hyderabad, which in turn encourages more people to be employed in Hyderabad.

The cost of living is pretty low in this city when compared to other metropolitan city.

Government has many offices situated in the location.

There are various types of real estate opportunity available for you in Hyderabad; there are lands, independent homes, apartments. There are more homes and lands for sale, and with more and more people looking to buy property in Hyderabad you wont have a lot of time left.

More and more people are interested in buying property not only in the main areas like Jubilee Hills and Banjara Hills. But many of them are also interested in buying property in the outskirts of the city; we see a tremendous increase in the outskirts mainly because of the IT industry. So now you can find properties of great value on the outskirt cities like Nanakramguda, Manikonda, Gopanpall of Hyderabad.

Wherever you buy property in Hyderabad, you can find all that you will need to live a comfortable life within five kilometers of your home. So when the city is growing at such a rate then it will make your investment worthwhile.

Real Estate Investing in Hyderabad offers many rewards like steady cash flow, security, long-term wealth and other tax benefits. With the city growing in such a rate you will find that the property values are always going up.

Now is the right time to invest in property in Hyderabad, and if you see the past trend of the growth of the city you will regret not purchasing property in Hyderabad. The growth of the city has also influenced many NRIs and foreigners to invest in real estate.

Shopping For Home Furnishing Items

When it comes of decorating and setting up our homes, we all have different choices. While some like to go for the ultra modern look, some find peace in the classy vintage look. No matter what your dream home looks likes, you will need some common home furnishing products such as king bedding, boys bedding, bed comforter sets, etc. When shopping home furnishing products you need to follow certain thumb rules.

Budgeting is one of the main factors influencing your purchase. When it comes to shopping for home furnishing items, it has been observed that many times people often cross their budget without even knowing about it. The desire to buy everything for your home at the same time may lead you to financial difficulties. Therefore, it is very important to decide the budget for shopping well before you start shopping.

Making the list of the items you need is another very important aspect of shopping for home furnishing products. An ideal house needs a host of furnishing items; and to eliminate any possibility of any of the requirements being overlooked upon, you need to make a list of the things you need. To help you make the list, you can make a list of things to buy for every room individually. This will help you notice everything you need to make a better home.

If you are looking to buy home furnishing items, either you can opt for live shopping and go store to store to find all the items on your shopping list or do the right thing; shop online. It is undeniable that online shopping is the most convenient way to shop for almost everything under the sun. Online stores offer a host of home furnishing products such as boy bedding, bed comforter sets, bed-sheets, furniture, electronics and much more.

Although online stores offer great convenience and cost effectiveness, we cant deny the fact that the web-space has some fake sites as well. Therefore, it is very important to read customer reviews before placing your order.

Fitted Bathroom Furniture

Rather than just being filled with a collection of individual items, fitted furniture bathrooms feature furniture which is integrated into the bathroom’s design. Having a bathroom with fitted furniture allows for far more space by using it more effectively. You can fit sinks onto cabinets, allowing for storage space, mirrors and such, or you can install a back to wall toilet which hides the cistern in another storage space. They provide a more traditional bathroom look, but lose nothing in sense of their practicality.

Style

If your bathroom furniture is going to flow together the way it should in an ideal fitted furniture bathroom, each individual item should have the same style. Unless you are attempting a very daring stylistic statement, you should avoid colour contrasts between individual items of furniture. The toilet should ideally be the say colour as the sink, and perhaps even the same colour as the tiles or cabinets. Light colours are better than darker ones for creating a feeling of spaciousness, and unless your bathroom has plenty of floor space already, you should be opting for spaciousness as much as possible.

Fitting

As the individual items need to be fitted perfectly together, you should not attempt to install fitted furniture yourself unless you have a good understanding of the process. If you plan to fit a sink to a cabinet, there are a great many aspects for you to consider before you start, and should you neglect even one of these aspects, you could end up with a crudely fitted sink which affects the entire feel of your bathroom. Professional installation will ensure the fullest sense of symmetry and style that your fitted furniture bathroom is capable of.

Cost

Depending on the current state of your bathroom, the cost of installing a fitted furniture bathroom can vary. Installation alone can cost a large amount, not to mention the cost of the individual items of furniture. You can save a lot of money if you know how to install items properly yourself, but you should only attempt this if you feel confident that you are capable of doing so. Buying a set of items is often slightly cheaper than buying different individual items, and ensures a sense of continuity in style and colour. Whatever the cost, investing in fitted bathroom furniture is one of the most effective ways of maximising the space of your bathroom.

Thundershield Floor Coating A Perfect Flooring Solution

Worldwide Industrial Enterprises, NY provides its customers their flagship product the Thundershield floor coating. It is an excellent commercial flooring solution that provides the commercial or residential environment a complete contemporary finish. A strong, durable and safe floor coating is the best way to repair the existing surface damage and it also ensure that the surface gets a long lasting protection from any further damages.

Be it any surface concrete, wood or steel, Thundershield floor coating gives you a reliable solution for a safe, clean and a non-slippery surface. Worldwide Industrial Enterprises is the provider of the superior quality Thundershield coating that comes in a wide range of colors. This perfectly safe resilient product comes with the flexibility of being used on all types of flooring, wooden decks, heavy machineries, metal roofs, patios, garages etc. This versatile solution is an easy do it yourself process that requires no professional assistance.

Thundershield paint is an easy to use application that can be done by any person ready to spare some time andput in minimal effort. One only needs to make the right choice of color of the area in order to get a new fresh look for the environment. Worldwide Industrial Enterprises, NY give its customers one of the best and most affordable options for maintaining the attractiveness of surface. They provide excellent customer service and satisfaction and also a toll free number to help clients requiring guidance in product application. Worldwide Industrial Enterprises reviews on the web praise the company for its stellar product and srvices. The excellent material offered by this firm have won them repeated business from several clients who have great feedback to give about the floor coating solutions.

To know more about Worldwide Industrial Enterprises aim, browse through their official website www.worldwideindustrialenterprises.com.

About the Author: Fred Albert is a technical writer, researcher who has a passion of writing and research. He mainly spends his time to informative websites like Wikipedia. Nowadays, He’s writing about business articles which are his core interest.

Nj Energy Audit Is First Step Toward Energy Efficiency

Through an NJ energy audit, you will achieve lower energy consumption and a whole lot better energy performance throughout your home. You can also considerably lower your energy bills and even improve the quality of air in your home. There is something more that an energy audit can give you. It can make you qualify for up to $5,000 dollar-for-dollar direct rebates that you can directly use for the overall upgrade of your energy-using materials. To top that, you can also qualify for $500 tax credits until December 2013 from the federal government. If your house is over 10 years old, you can qualify for this energy rebate. Other points for qualification are air conditioner compressor that is older than 8 years, furnace that has been more than 10 years in use, and water heater that is older than 5 years.

Energy Audit Process

Savings for you can only come from improved energy efficiency. It all starts with an energy audit from the experts, such as an NJ energy audit. A highly trained energy auditing technician will give your home a thorough technical inspection including your furnace, attic, and crawlspace areas. The technician will also inspect your water heater, appliances, and air conditioning units. The findings and the resulting recommendations will be included in a report that will be subsequently submitted by the technicians auditing company to the New Jersey Clean Energy Program.

Improved Home Heating

An upgrade to your home heating is one of the best ways to make energy use more efficient in your home. These upgrade and improvements can be done by such companies that perform heating repair in South Jersey. The result is an overall efficiency upgrade to your energy-consuming systems at home. These technical experts professionally inspect your home heating system and provide recommendations for its improvement. Some technical recommendations include the use of a better thermostat for better heat control, installation of more thermostats for heat control in individual rooms, and change into a new and energy-efficient furnace.

Efficiency Lowers Energy Costs

Only when heating and air conditioning appliances are repaired, improved, and upgraded can we be assured that energy efficiency can be achieved. Likewise, only energy efficiency can bring about reduced energy bills and costs. One of the best ways to achieve all these is through the repair of heating appliances by professionally trained companies that accomplish heating repair in South Jersey. These companies and their technicians do the most effective repairs after a thorough inspection of your heating appliances. The result is improved quality of air in your home and reduced energy costs.

Factors Influencing Solar Panels Efficiency

Efficiency of solar panel is probably one of the reasons why most potential customers hesitate to swap their power source from conventional type to solar power. The worry of many consumers is whether after incurring the cost of solar system installation, the system will produce enough solar power to meet their needs.

Out of the total sun energy that strikes a solar panel only a fraction of it is harnessed and converted into electrical power. Efficiency of a solar panel can be gauged depending on the amount of sunrays it is able to capture and turn into usable power. On average a standard solar panel for home use converts only 20% of the total amount of solar energy that comes into contact with the solar panel. To convert the direct current generated by the solar panel to alternate current a further 15% is lost remaining with only 5 percent for use by the appliance. This means you have to compute the total amount of power that you need so that you can determine the number of solar panel you need to buy.

There are however new technologies that are coming up which are aimed at increasing the efficiency of solar panel. An increase of up to 40% in efficiency and be attained by coating the solar cell with a thin absorbing material. Further, 40% efficiency can also be achieved by use of silicon wafer which is the most commonly used material. Nano particles and magnetic modules are more superior materials with as much as 80% efficiency and the former have an added advantage of harnessing the solar energy even at night.

With eighty percent efficiency solar panel comprising of nano particles can be used to power industrial machine while the standard 20% efficiency panels are ideal for home use. With more and more technologies coming up every other day there are chances of coming up with solar panel that can be highly efficient in generating enough solar power to meet all our needs.

There are factors that affect the solar panel efficiency and their output. The amount of solar energy which reaches the panel is critical. In areas with few hours of sunlight due to weather conditions the efficiency of the solar panel is compromised. Orientation or position of solar panels may also affect their exposure to sunlight and they should be positioned in such a way that they receive maximum solar energy possible and for longer hours. If dust and debris cover the panel they interrupt solar energy reaching the panels reducing their efficiency.

The process of installation can also affect the efficiency of solar panel. The wiring materials and connections have to be done rightly to avoid loss of power. These factors affect not the absorbing ability of the solar panel but the conveying process as well. Regular cleaning of the solar panel is a must to get rid of these materials.

Solar energy may be available in abundance but its process of harnessing and delivery affects its efficiency. The most crucial area that needs more research is solar panel manufacturing technology that can improve the ability of the panel to absorb as much of the suns energy as possible. There is need also to improve the process of conversion from direct current to alternate current.

As earlier implied to have your home solar system performing optimally, pick good quality solar panels and have them installed professionally. This will ensure that you enjoy all the benefits that come with solar power. Among them is reducing the cost you incur to cater for your power needs and doing it in a pollution free manner.

Led Grow Lights – The Importance Of Spectrum

LED Grow Lights – Confused Anyone?

In the world of LED Grow Lights the products vary dramatically from one company to the next, as does the information behind those products. I’ve often found myself confused at times by the contradicting information I find on many sites, which has lead me to do my own research as many often do. After all, with all the tri-band, quad-band, 6-band, 11-band, 12-band, and 15-band lights on that market, how do you know which one to choose?

HID Grow Lights – Why they’re being Replaced

Most of us switching to LED Grow Lights have used an alternative form of indoor lighting in the past such as High Pressure Sodium (HPS), Metal Halide (MH), or High output Fluorescent (T5). Any of us who have used these lights know one important thing about them: they are limited by their spectrum. The majority of the light a HPS or MH bulb emits is in the 500-600nm range, much of which is inefficiently absorbed by plants. In fact up to 70% of the light a HID bulb creates can be completely wasted in a grow room. Why is this you might ask? It’s because plants absorb primarily red and blue light, and need a special balancing of the light in those regions in order to grow optimally. HID lights are weak on both red and blue output, even though HPS is stronger in red while MH is strong in blue.
In the past when using HID you would want to utilize the spectral differences of the MH and HPS bulbs to your advantage, relying on the heavier blue output of the metal halide bulb in vegetative stage to keep plants short, and the HPS in bloom to allow them to stretch. The reality however, is that plants need a balanced amount of both red and blue in both stages of growth in order to grow optimally. Limiting either of these wavelengths creates a stress response in the plant to either grow shorter, or stretch, but when they are balanced properly you get super tight internodal spacing in veg with monstrous flowers during bloom. That’s what’s so great about LED Grow Lights, in that you can use one single light source throughout the entire growth cycle. Many people are still under the impression however, that you need separate vegetative and bloom stage LED Grow Lights when this is simply not the case.

The Science that drives Plant Growth

The main ingredients for photosynthesis are light, carbon dioxide and water. Just as our bodies require certain amounts of nutrients for proper cell division, plants require specific ratios of light for photosynthesis. Plants convert light energy into plant energy in their chloroplasts (much like the mitochondria in human cells). The chloroplasts produce Chlorophyll A and B, the two primary compounds that drive photosynthesis. These compounds absorb primarily blue and red light, more specifically, 439nm and 469nm blue, and 642nm and 667nm red. LED’s give us the ability to target narrow wavelengths of light so they can be specificaly tailored to provide the proper”light” recipe for photosynthesis. So based on this information on Photosynthesis, a LED Grow Light needs 4 wavelengths to target each of the chlorophyll absorption peaks.

In my reading I learned that Photosynthesis is not the only process that affects growth rate and yield. In fact there are two other important sciences that can enhance yield dramtically if they are applied to a grow light. One is called the Emerson Enhancement effect which dictates that when 740nm far-red light is shone simultaneously 660nm, photosynthetic rates increase as much as 30%. The other is called quantum efficiency which focuses on the importance of balancing each of the 3 regions of PAR, specifically focusing on green. It’s been learned in recent years that green actually plays a vital role on plant development, fruit ripening, and overall growth times, and that green penetrates deeper into plant tissues acting as a delivery agent for other wavelengths, as well as stimulating the lower chloroplasts. Studies by Nasa confirm that when green us balanced in with the green and blue wavelengths in the proper ratios, that growth times can be reduced up to 30% with a 30% enhancement in yield! The most familiar green for LED’s is 525nm, which means in total I count 6 wavelengths that are essential for optimal growth. 4 stimulate photosynthesis, 1 stimulates the Emerson Enhancement Effect, and the last fulfills the quantum efficiency requirements for faster growth rates and bigger yields.

LED Grow Lights – What have we Learned?

What we learned from HID lights is their weakness is producing a bunch of unused or wasted light. The strength of LED Grow Lights is being able to focus on the 6 wavelengths we discussed above, so that no light is wasted during the growth process. So what does that mean for all of these 11-band and 12-band or 15-band LED Grow lights? Quite simply it means that just like HID grow lights, they’re producing a spectrum where much of the light is being wasted instead of absorbed by plants. Likewise what does it mean for the tri-band or quad-band lights? It means they’re not developed enough yet to provide the types of results you need to outperform HID. Too little spectrum is just as bad as too much, and with the cost of LED Grow Lights you certainly don’t want to choose wrong or you’ll wind up paying a lot for it in the end. The Goldilocks zone are those 6-wavelengths you really want to look for: 439nm, 469nm, 525nm, 642nm, 667nm, and 740nm.

Penetrator LED Grow Lights – The Goldilocks Zone

The closest LED Grow Light I have found that fulfills all of the scientific requirements I’ve researched, are the Penetrator LED Grow Lights from Hydro Grow LED. These lights use a 6-band spectrum with 440nm, 470nm, 525nm, 640nm, 660nm, and 740nm. They really seem to have a grasp on LED Technology, and provide a lot of great information on their site. In fact they had a few extra articles on green and quantum efficiency that I’d never seen before, which taught me even more than I know now. They truly appear to be a pioneer in their field, and that’s why of any LED Grow Light on the market I would recommend theirs. Their 6-band spectrum is the real deal.

Aluminium Lean-To Conservatories Provide Great Thermal And Energy Efficiency

Aluminium lean-to conservatories provide superb thermal and energy efficiency none more so than lean-to conservatories designed by Apropos.

Apropos lean-to conservatories conform to the highest standards and regulations for thermal and energy efficiency; meaning that, in the colder months, their lean-to conservatories can be enjoyed as much as they would be in the summer months.

First the statistics…

Apropos lean-to conservatories offer one of the best thermal efficiency ratings on the market – with a structural U-value of 1.6 W/mK and a centre pane U-value of 1.1 W/mK.

What does this mean?…

It means that Apropos bespoke lean-to conservatories are super efficient at retaining heat during cold weather. Conservatories of old were chilly places in the winter months, and, more often than not, shut off from the rest of the property by external-style patio doors. Not so Apropos modern lean-to conservatories, which act as hubs for family life all-year around.

The lean-to conservatories designed and manufactured by Apropos provide a welcoming space for all the family to enjoy, whatever the weather outside. Indeed, lean-to conservatories need not be partitioned off with bulky doors. Beautiful archways can be created to allow access into the lean-to conservatories at all times with householders safe in the knowledge that warm, inviting environments will be awaiting them in their lean-to conservatories.

At this time of year, with cold weather fast approaching, it is reassuring to know that lean-to conservatories will withstand the harsh winter months.

Of course, lean-to conservatories can be used as sun rooms or even as greenhouses in the summer months, with amazing folding sliding doors allowing wonderful freedom to maximise the garden; but lean-to conservatories can also be used as dining rooms, living rooms, and kitchen extensions throughout the year.

Indeed, in a few weeks time many families will either be preparing or tucking into their Christmas dinners in their own lean-to conservatories; enjoying the magnificent settings that lean-to conservatories provide for such occasions. Indeed, should it be a white Christmas then the picture will be complete. Proof indeed that lean-to conservatories are super family places to be enjoyed whatever the weather.

If you want to learn more about lean-to conservatories please request a brochure at http://www.apropos-conservatories.com/contact-us.php, or a free design consultation at http://www.apropos-conservatories.com/design-consultation. Alternatively, telephone 0800 328 0033.

Disco Decorations And Interior Concepts For A Nightclub

For all those who own the nightclubs and discotheques, arranging every little thing according to the tastes and preferences of the guests and party animals is really important. The entire business depends on the fact that one can manage all the events well. The kind of disco decorations you put up for the party speaks volumes about your potential to throw a wow-inducing party. It is simply a matter of creativeness and the suppliers for the products are lining up for you in the market. Every little thing is very easily available at the real stores or you can order the things online, if you dont get the things according to your preference and requirement from the dealers out there. Right from the doors at the entry point to the furniture in the party hall every little thing should match with the mood of the partygoers. The items you select for the disco decorations need not be really high-priced as there exist quite a few things that you can get on order as per your own specifications, and normally you save a lot on these customised items.
The term disco decorations need not confuse you — you need to put the most chic and fashionable mirrors, that make the club look large. The ready made or made to order lamps and lampshades can make those dark and dingy corners vibrant and colourful and the sets of sofas and lounges can be chosen in different designs and textures so that all the patrons need not be disappointed. Disco decorations can help the disco keep up its popularity and standards. The boring dance floors will by no means be acceptable to the partying people and you need to be extra cautious while deciding on the flooring material for the club.
People flocking to the club can surely be looking for a absolutely stocked bar, and the disco decorations have to be lined up to the bar. Just as you do all the lighting and sitting arrangement for other areas of the disco, you have to continue the trend right up to the drinks area. Continuing the spirit of disco decorations, you can get the LED bars and bar shelves. As with lighting and consuming the songs becomes a part of the package, so ensure the disco decorations have been extended to the DJ place as well.